Paver Retaining Walls, from the subgrade up
Segmental walls engineered for the height and the soil behind them.
What actually goes wrong
When a paver surface goes wrong in Florida, the pavers are rarely the thing that failed. Water got into the base, the base moved, and the surface followed it down. Fix the surface only and you are back in two years.
Our soil does well with steady rain and badly with a sudden flood of it. Across much of the region it is sand over limestone, and an afternoon storm can deliver two inches in an hour. That is when the base either holds its shape or starts to wash.
Next on the list is any mature tree nearby. Its roots will find the moisture held in the paver base and grow into it, raising the pavers as they go.
None of this is visible in a finished photo, which is why the cheap version and the right version look identical on day one. They stop looking identical around year two.
How we run this job
We come look at it
Expect an honest answer, even a small one. We walk the property with you, follow the water, and say exactly what we see. If you were bracing for a big job and it is not one, you will know.
You get the plan in writing
Everything in writing up front: what we are doing, what it is made of, how long it takes, and what it costs. Nothing changes without you signing off on it.
We build the base first
Dig to depth, compact the aggregate in layers, screed the bedding. Nobody ever sees this part again, which is exactly why most failures start here.
Pavers go down and get cut in
The field goes down to the pattern, edge cuts happen on site, and the perimeter gets a restraint so nothing creeps.
Joints get filled and the site gets cleaned
Sand swept in and compacted, the surface washed down, and the property left the way we found it. We haul our own debris.
What outdoor rooms do to a surface
Heat is a real material constraint around fire features. Some units spall when they take repeated direct heat, so the ring immediately around a fire pit gets specified differently from the field around it.
Outdoor living surfaces get treated as furniture rather than pavement, which is exactly how they fail. A kitchen run takes grease and heat; a fire feature takes heat and foot traffic in the dark; a lanai floor lives under a cage that concentrates runoff.
Under a screen enclosure the cuts have to be clean to the track and the drainage has to work with the cage rather than against it. Water coming off a cage lands in a line, not spread out, so it concentrates in one place.
The pavers are a wearing surface. The base is the building.
Joint sand looks like filler between the pretty parts, and it does more work than anything else you can see. Sand packed into the joints is how one paver hands part of its load to the ones around it, and that sharing is what turns loose units into a surface. Lose the sand and the sharing stops. Each paver bears its own load, and that is exactly when rocking and cracking begin.
Ask what goes in the joints. On most patios now the answer is polymeric sand, which binds when it is wetted and holds up to washout much better than plain sand does. It is also easy to get wrong. It has to be installed dry, swept off the surface completely before any water, and watered in per the manufacturer’s directions. Hurry any of that and you get a hazy film.
Joint sand
Structural, not cosmetic. It transfers load between units, which is the whole reason a field of loose pavers behaves like a surface.
Separation
Geotextile between subgrade and base stops fine soil migrating up and destroying the aggregate structure.
Base depth
Set by what the surface carries, not by habit. A walkway and a truck-bearing drive are not the same excavation.
More outdoor work
This is work we do throughout the region. Here are a few of our most frequent areas:
What it asks of you afterwards
People walking across pavers are rarely looking at their feet, which is why a raised edge matters. More than about a quarter inch of lift is enough to catch a toe. Deal with that one quickly, especially on commercial property, where it is a liability concern along with a maintenance one.
Owners are often surprised how little a properly built paver surface needs from them. The joints are where most of the attention goes: keep them full of sand and free of leaves that would otherwise rot in place. Beyond that, keep an eye out for any area that starts to sink.
Sealing is optional and it is a preference rather than a requirement. It deepens the color, makes stains easier to lift, and helps hold joint sand. It also needs redoing every few years and a bad sealer choice can leave a plastic-looking sheen or trap moisture. We will tell you honestly whether your surface benefits.
If staining is your main worry, porcelain is close to stain-proof. It absorbs almost nothing. It asks more of the installer than most materials, though: an uneven bed shows through, so base work has to be precise, and cutting it cleanly takes the proper blade and some patience.
Most of what we put down is concrete pavers. They come in more shapes and colors than any other option and lay up predictably. Years later, when you want to add on or patch, they are also the easiest to match. The pigment runs all the way through each unit, so sun softens the color over time and there is no surface coat to wear through.
Sun fades color that was added to a material. Clay brick has none added: its color is the fired clay, which is why it holds essentially forever. It runs more expensive and offers fewer shapes, and it suits anyone who wants the same look in twenty years.
The shortcuts that surface two years later
A finished job hides all of these. Because nobody can spot them at handover, they keep showing up on paver work.
Skipping the geotextile
When we tear out a failed paver job, a muddy base with no fabric under it is a common sight. The soil and the stone have blended into one weak layer. That is exactly what separation fabric is there to prevent, and why resetting pavers on top of that mess never holds.
Using the wrong sand in the bedding
If pavers are wandering out of line, check the bedding. It should be angular concrete sand with sharp grains. Rounded mason or beach sand rolls under load and lets them move.
Sealing too early
Leave new concrete pavers unsealed through their first month. They are still curing, and efflorescence is still working out of them. Seal over that and the white haze can be locked under the sealer permanently.
Laying over the old surface
Overlaying is tempting because it skips the tear-out and costs less up front. It also inherits every problem below. When the old surface failed because of the base, the new one is sitting on the same bad base and goes the same way.
If nobody talks to you about drainage, they are quoting a different job.
Common questions
What happens to the old surface
That part is on us. The existing surface gets broken out and hauled off the property, and concrete and pavers go to recycling when there is a recycler in the area. It is covered in the scope you sign.
How do you keep it from settling again
We find out why it sank before we touch it. Resetting pavers on the same weak base or over the same wet spot only buys you a little time. Usually the cure is better drainage and a properly rebuilt base, and sometimes it means dealing with a root or a downspout.
Do you work with HOAs and property managers
Often. Board approvals move on their own calendar, so we plan the job around it. Send us your submittal requirements and meeting dates and we will have what the board needs ready when it meets.
Do you cover Miami, FL
We do. Miami, FL is home base for us, and our crews are in the area most weeks. Call with what you have in mind and we will be straight with you about timing.
Is there a warranty
We do offer one, in writing, on the workmanship. The manufacturer handles the warranty on the pavers, and that documentation comes to you from us. We also tell you now what is not covered, things like roots or drainage that change after we finish, so it never comes as a surprise.
Can you work around my pool being open
Usually. Pool deck work gets staged so you keep a safe path and the water stays covered while we cut. If there is a stretch where the pool has to be off limits we tell you which days up front.
Start with a conversation
Photos only tell us so much. Standing on the surface tells us the rest. One of us will come out, walk the property with you, check where the water runs, and put what we find in writing.
Quality you can stand on